-
Luna
NEW
-
Horizon
NEW
-
Shadow
NEW
-
Eclipse
NEW
Please note that your monitor will affect colour accuracy
WHAT IS EVENEX FORTE?
Evenex® Forté is a classic melamine laminated surface ideal for interior horizontal and vertical surfaces in residential and commercial applications, including, furniture, joinery, doors and wall panelling.
The melamine surface provides excellent resistance to external agents such as hot and cold liquids, scratches and abrasions. Panels are available in a variety of sizes and thicknesses and offered with a range of matching 1mm ABS edging. Laminate sheets are available in a thickness of 0.6mm.
ADVANTAGES
- Suitable for interior horizontal and vertical surfaces.
- Enhanced resistance to hot and cold liquids, scratches and abrasions.
- Resistance to damp, mould and microorganisms.
APPLICATIONS
Interior horizontal and vertical surfaces for:
- Wall and ceiling panelling
- Joinery
- Furniture
FACE
Decorative CPL 0.3mm thick, composed of pure cellulose fibre impregnated with a melamine finish to provide extra protection against humidity, water, scratch, stain, abrasion and UV.
PANEL
Wood panel E0 MRMDF, faced with decorative CPL laminate on both sides.
SHEET
Decorative CPL on a phenolic impregnated kraft paper support.
DIMENSIONS
- Panels E0 MRMDF (18/25/32mm*)
3000/2400 x 1200mm - Sheets (0.6mm*)
3040 x 1240mm - Edging ABS (1mm)
23/38mm
* Nominal thickness.
Other sizes/substrates available on request.
REACTION TO FIRE
Evenex Forté has achieved a Group 1 fire rating according to Specification A2.4 of the Building Code of Australia, BCA C1.10a Fire Hazard Properties, Wall and Ceiling Linings/Coverings. Refer eltongroup.com/downloads for latest fire rating results and certificates. If you require Group 1, please remember to ask for it at time of ordering so that we can ensure a Group 1 substrate is used.
REACTION TO LIGHT
All products change colour over time when subjected to direct and indirect light, both natural and artificial. In addition, heat and humidity will accelerate the ageing process. Some colours change more than others, but none will withstand prolonged exposure to light without exhibiting some change over time, therefore, we do not recommend the use of Evenex Forté in areas subject to high light exposure.
- Evenex Forté is recommended for interior horizontal and vertical use only.
- Do not drag/slide sheets across one another.
- Stack panels onto a flat surface, avoid leaning against walls for a prolonged period to reduce the chance of bowing.
Evenex Forté can be washed using non-abrasive surfactant-based products such as those commonly used in the home. Before cleaning with industrial products we recommend performing a stain-resistance test in line with current technical regulations on an offcut.
SPECIFICATION
This short form specification template will help you specify Evenex Forté.
Product Name
Evenex Forté Insert colour
Contact
Elton Group 1–5 Brough St. Springvale 3171 VIC Australia
T +61 3 8555 2235
enquire@eltongroup.com
Grain Direction
As indicated on the drawings
Substrate and Backing
E0 MRMDF in 18 / 25 / 32 / Other* Insert thickness mm
If Group 1 fire rating is required, please specify
Edges
1.0mm matching ABS / Other* ( specify )
*delete as applicable
SAMPLES
Evenex Forté is available in 100mm x 100mm colour board samples.
Samples are sent by Australia Post regular mail service.
Requests received by 2pm will be processed same day.
To order samples click on the Order Sample tab on the desired product and add to sample cart. At the end of your session proceed to sample cart, at the top right hand of your screen, fill in your details and complete your sample order.
If you require samples to replenish your binder, please call us on 1300 133 481 or email enquire@eltongroup.com.